SAFT25 Fiberglass Filter Tissue to Lower Pressure Drop in Organic Waste Gas and Air Purification Systems
2026-11-18 15:02
1. Technical Overview
SAXOBRAN SAFT25 is an ultra-thin wet-laid non-woven fiberglass filter tissue engineered for continuous activated carbon slurry impregnation, rotary pleating, and honeycomb adsorption wheel assembly.
We manufacture this open-pore fiberglass tissue as a high-temperature carrier substrate that holds adsorbent slurries while keeping system airflow resistance low.
The 25g/m² fiber matrix withstands continuous thermal desorption temperatures up to 260°C without shrinking or charring. Filtration OEMs and environmental equipment factories feed SAFT25 directly into VOC (Volatile Organic Compound) concentrators, combustion flue gas scrubbers, and HEPA pre-filter lines to prevent media collapse, stop fiber shedding, and cut fan energy consumption.

2. Technical Specifications Table (TDS)
| Technical Parameter | Metric Value | Test Standard | Workshop Function & Purpose |
| Unit Weight (Grammage) | 25 g/m² (±5%) | ISO 3374 | Controls exact fiberglass tissue mass to maximize open porosity and gas permeability |
| Nominal Thickness | 0.25mm | ISO 534 | Maintains ultra-thin pleat profile to fit maximum filtration media inside compact housings |
| LOI | 10% | ISO 1887 | Keeps binder web intact during activated carbon slurry dipping and 260°C thermal desorption |
| MD Tensile Strength | ≥ 80 N/50mm | ISO 3342 | Prevents web breaks and edge tearing on high-speed automated pleating and slitting lines |
| Moisture Content | ≤ 1.0% | ISO 3344 | Eliminates steam pinholes, slurry washout, and adhesive delamination during oven drying |
3. Key Features & Workshop Problem Solvers
Cuts System Pressure Drop and Blower Energy Costs
Dense synthetic filter substrates choke airflow, forcing industrial exhaust fans to draw higher electrical loads. SAFT25 fiberglass filter tissue uses fine, uniformly dispersed E-glass microfibers at an ultra-thin 0.25 mm profile. It maximizes gas permeability across the filter bed, keeping initial pressure drop low while trapping fine particulates.
Withstands 260°C Thermal Desorption Cycles Without Shrinking
Polyester and polypropylene substrates melt or deform when organic waste gas concentrators heat up to regenerate activated carbon or zeolite beds. SAFT25 fiberglass tissue utilizes an inorganic glass matrix with a thermosetting binder that holds dimensional stability up to 260°C. It survives repeated thermal regeneration cycles without warping, cracking, or releasing smoke.
Clean Automated Pleating and Slurry Impregnation Without Web Snaps
Ultra-lightweight filter veils often tear at the pleat tips or snap in wet carbon dipping baths, halting continuous production lines. SAFT25 fiberglass filter tissue delivers a Machine Direction tensile strength of ≥ 80 N/50mm. This pull resistance supports crisp, uniform pleating and smooth wet-slurry coating with scrap rates below 0.5%.

4. Target Applications & Processing Lines
Organic Waste Gas (VOC) Adsorption & Honeycomb Rotors
Environmental equipment plants impregnate SAFT25 fiberglass filter tissue with activated carbon or hydrophobic zeolite slurries to form corrugated honeycomb wheels and pleated adsorption beds. The fiberglass tissue anchors the adsorbent particles securely and endures hot-air desorption in petrochemical, printing, and paint-booth exhaust systems.
Combustion Flue Gas & Industrial Air Purification Equipment
SAFT25 serves as a protective face veil and structural carrier in pleated filter cartridges, coal/gas combustion exhaust scrubbers, and cleanroom HEPA pre-filters. The fiberglass filter tissue captures coarse oil mist and soot particles upstream, extending the service life of expensive downstream micro-glass HEPA cores.
5. Frequently Asked Questions (Technical FAQ)
Q: How does SAFT25 fiberglass filter tissue hold activated carbon or catalyst slurries without shedding?
A: SAFT25 features an open, three-dimensional wet-laid glass fiber network with controlled surface roughness. When dipped into liquid carbon or zeolite slurries, the fiberglass filter tissue locks the active particles deep inside the fiber matrix, preventing powder dusting under high-velocity gas flow.
Q: Can SAFT25 survive continuous high-temperature exhaust from natural gas, coal, or oil combustion?
A: Yes. SAFT25 fiberglass tissue is built from inorganic E-glass microfibers bonded with a high-temperature thermosetting resin, maintaining structural integrity up to 260°C without melting, burning, or shrinking.
Q: Why is low moisture content (≤ 1.0%) important for SAFT25 before pleating or slurry dipping?
A: Excess moisture softens organic binders in ultra-thin mats, causing web breaks on rotary pleaters and uneven slurry uptake in dipping tanks. SAFT25 arrives factory-sealed at ≤ 1.0% moisture content to guarantee consistent tensile strength and uniform coating absorption.